Industrial Masonry Sealer
$189.95/5 GAL ($37.99 per Gallon)
Flat Rate Shipping
Up to $99
$100 - $249
$250 - $399
Industrial Masonry Sealer is a penetrating masonry and concrete sealer that includes a proprietary water-based polyester polymer. Once dry, the polyester polymer forms a barrier that completely fills the voids and solidifies the substrate. Although its named Industrial Masonry Sealer, it can be used on most any porous surface.
Brick Sealer - It can densify the brick or paver, thereby increasing its strength and future durability. As it is not a topical sealant, it will not be slippery nor change the look of the surface, yet permanently protect against water or oil/contaminants from absorbing.
Concrete Sealer - Concrete is very porous and subject to 'freeze thaw' conditions in winter climates, whereby water freezes in the pores during the evening and then thaws out during the day. This constant contraction/expansion helps 'spall' (chip/fragment/flake) concrete. Even in warmer climates, weather, abrasion and contaminants will weaken the substrate over time. This product will permanently fill the pores to help prevent future spalling/deterioration and provide easier maintenance of the surface. Its like poring liquid plastic into your concrete.
Driveway Sealer - Deicing chemicals and salts that cars track in from the highways are highly corrosive to concrete. Over time those chemicals will pit the surface. The natural abrasion of driving on concrete, weathering and car fluids that leak into the substrate also take their toll. Industrial Masonry Sealer will strengthen and provide stain resistance, yet unlike topical sealants will not wear away or provide 'hot tire pick-up' (hot tires melt surface coatings like acrylic sealers and then peal them up).
Stone Sealer - Limestone for example is extremely porous and soft. This product will harden the stone but also not change the natural look of the surface.
For industrial, commercial and residential use on concrete, brick, stucco, porous stones and all masonry. Can be used on horizontal and vertical surfaces such as homes, buildings, chimneys, sidewalks, driveways, basements, roads, floors, bridge decks, parking lot structures and patios.
Remarkably superior to other sealers because it seals and protects from within. As Industrial Masonry Sealer does not contain any solvents, it is non-toxic, non-flammable, non-caustic and has low VOC. It will not react with anything and can be safely used indoors as well as outside.
This product penetrates into the concrete or masonry 2 - 4 inches and provides a paintable surface. Authorized by USDA for use in federally inspected meat and poultry farms.
Industrial Masonry Sealer provides LEED (Leadership in Energy and Environmental Design) credits toward LEED Certification for Green Building projects by promoting Indoor Environmental Quality (IEQ).
IEQ Credit 3 - Construction - Indoor Air Quality (IAQ) Management Plan
IEQ Credit 4 - Low Emitting Materials
Product and Application Info:
COLOR: Translucent. Dries clear with no gloss
* State: Liquid
* Vapor Pressure: (Air + 1) - N/A
* Solubility in Water: Dilutable
* Boiling Point: 100 degrees Celsius / 212 degrees Fahrenheit
* Freezing Point: 0 degrees Celsius / 32 degrees Fahrenheit Water
* Specific Gravity: (Water=1) - 1.10 @ 20 degrees Celsius
* Evaporation Rate: (BAC=1) - Same as Water
* Percent Solids by Weight: 13%
* pH: 6.8
* Volatile Organic Compounds: 13.63 G/L
Method: Spray on using low pressure sprayer
Theoretical Coverage: 200 square feet per gallon
Application Instructions: See Product Data Sheets (PDS)
SHIPPING & STORAGE
Container Type: 1 Gallon * 5 Gallon Pail * 55 Gallon Drum
Shipping Weight: 9.4 lbs. * 46 lbs. * 496 lbs.
Average Shelf Life: 12 months minimum from date of manufacture when maintained in protected storage. Storage at 40-90 degrees Fahrenheit
Copyright © 2019 Holmlund Masonry. All Rights Reserved.